The Automatic Capsule Filling Machine integrates machine, electricity and gas, adopts microcomputer programmable controller, touch panel operation, frequency conversion speed regulation, and is equipped with electronic automatic counting device. The machine is sensitive in action, accurate in filling dose, novel in structure, beautiful in appearance, convenient in operation, and can automatically complete the action of in place, separation, filling and locking of the capsule. It can reduce labor intensity, increase production efficiency, and meet pharmaceutical hygiene requirements. This device is therefore widely used to fill a variety of capsules. Its highly efficient automatic capsule filling efficiency has been well received. So how do operators properly maintain this mechanical device?

在清洁过程中要记住以下几点：

第一，清洁频率：1。生产前、生产后需要对机器进行清洁消毒。更换品种、规格、批号时必须清洗干净。设备修理后必须彻底清洁和消毒。

第二，洗涤剂和消毒剂：饮用水、纯净水、75%乙醇。

三是清洁方法和消毒方法：

Cleaning method: First, brush the dust of the machine with a brush. Use a vacuum cleaner to suck the parts of the machine and the table top. Then, clean all parts (including powder punches, metering discs, powder hoppers, etc.) that have been folded off with alcohol, and wash the countertops with an alcohol rag. The upper and lower mold holes are cleaned with a small brush and alcohol. Finally, wipe the glass shield and equipment surface with purified water.

消毒方法：按设备标准操作规程清洗设备后，安装设备部件。用抹布、75%乙醇或3%过氧化氢擦拭两次。75%酒精和3%过氧化氢在消毒过程中应交替使用，每周更换一次。如果用过氧化氢消毒，用清水消毒两次。